Braeburn 7320 - Setting the FAN Control Mode

Setting the FAN Control Mode
TheFanControlhas4modesofoperation–AUTO,ON,CIRCandPROG.Themodecanbeselectedbytouching
the FAN TouchPad to scroll through the different modes.
NOTE: Depending on how your thermostat was configured, some fan modes may not be available.
AUTO The system fan will run only when your heating or
cooling system is running.
ON The system fan stays on.
CIRC The system fan will run intermittently to help circulate
air and provide more even temperature distribution when
the heating or cooling system is not active.
PROG The system fan will function in the AUTO or ON
modes depending on your program schedule.
HUMID
23 User Manual