6
Thermostat Maintenance
Screen Cleaning
To access the screen cleaning mode hold the CONFIG
and
FAN
TouchPads at the same time
for 3 seconds (Figure 1). The screen will
display a countdown timer for 30 seconds
(Figure 2). During
this time
the screen will be locked and you may
proceed with cleaning the
screen. After 30 seconds the display will
return to normal.
Never spray any liquid directly on the thermostat. Spray your
cleaning liquid on a soft cloth and then proceed to clean the screen
with the damp cloth. Only use water or household glass cleaner.
Never use any abrasive cleansers to clean your thermostat.
HUMID
Figure 1
Figure 2
User Manual 38
To Next Page
Loading...
