Brahms GSM11 - Assembly Instructions

To Next Page

To Previous Page

ASSEMBLY INSTRUCTIONS

The GSM telephone GSM telephone dialler must be

assembled in an easily accessible area, therefore the

area around the GSM telephone GSM telephone dialler

must be kept free from obstacles.

Proceed as described below for GSM telephone dialler

installation:

Open the cover by unscrewing the screw located on

the side (fig. 1).

Lift the GSM telephone dialler cover (fig. 2).

Using the provided template, mark the positions for

the fastening holes. Make sure the wall is flat at the

selected location.

Drill holes in the wall that will house the container and

insert the dowels required to fasten the container.

Firmly secure the bottom of the GSM telephone dial-

ler to the wall, making sure that the tamper (shown

in fig. 3) with the anti-tampering function is triggered

correctly.

fig. 1

fig. 2

fig. 3

Installer's Manual-Assembly instructions