SMS syntax Description Value legend
FUNCLI.X.Y.Z. This is used to configure the CLIP func-
tion for a specific user and the relative
notification type.
X: user number (1-20);
Y: user clip command.
Can have the values:
None (NO);
Output 1 (U1);
Output 2 (U2);
Output 3 (U3);
Output 4 (U4);
Z: (notification type) None (NO); SMS
(S); Ring (RI);
FUNCLI this is used to set the CLIP functionality for the GSM telephone dialler. The CLIP function is defined as the possibility
to control the individual outputs remotely and to receive the relative confirmation at no charge.
Refer to chapter "General information regarding GSM telephone dialler setting" in the paragraph "User Setting".
The SMS syntax must be FUNCLI.X.Y.Z where:
X represents the sequential number of the user in the address book for which the CLIP functionality should be set for a
specific output (possible values 1-20);
Y represents the CLIP command to be associated to the user (possible values NO-U1-U2-U3-U4);
Z represents the type of notification that the GSM telephone dialler should send to the user once the command is per-
formed (possible values NO-S-RI).
Refer to chapter "Default Parameters" in the paragraph "Users" for more details about the possible values and standard
values.
SMS syntax Description Value legend
PROGNUMGES.X. Sets the Provider number of the utilised
SIM card. It makes it possible to manage
the credit requests or the requests to
receive SMS from the Provider
X: SIM card Provider telephone
number.
PROGNUMGES programs the number of the utilised SIM card Provider and makes it possible to manage the credit requests
or the requests to receive SMS from the Provider
The SMS syntax must be PROGNUMGES.X. where:
X SIM card Provider telephone number.
63
Installer's Manual-General setting information
63
EN
EN
To Next Page
Loading...