ADD FURNACE CO.,LTD.
44 ซอยบรมราชชนนี
โทร: 02-888-3472 โทร (.บบแกออ) :08-08-170-170 กฟแซ์: 02-888-3258
https://www.add-furnace.com E-mail: sales@add-furnace.com
DO Process: Set digital output / relay on for process high or low, and then
select Target
Say, from 1 of DO 1 to DO 6. The relay is not going to be latched when it is
activated.
Enable Timer: Start the timer, and then select Target timers
Disable Timer: Stop the timer, and then select Target from Timers
Preset Totalizer: set a preset value to the target Totalizer.
Reset Totalizer: Reset Totalizer into zero, and then select Target Totalizer or All
totalizers
Enable Totalizer: Start the Totalizer, then select Target Totalizer or All totalizers
Disable Totalizer: Stop the Totalizer, then select Target Totalizer or All totalizers
Preset Counter: set a preset value to the target counter.
Reset Counter: Resets the counter into zero, and then select Target counter or All
counters
Inc Counter: Increase 1 to the counter, and then select Target counter or All counters
Dec Counter: Decrease 1 from the counter, and then select Target counter or All
counters
Log Report: Make the report for Counter, Totalizer, Analog inputs Min/Max/Avg,
Math Min/Max/Avg, All Counters, All Totalizers, All Channels Min/Max/Avg.
Choose this column, and then the report will be presented as details described
in section “Reports”
Reset MinMaxAve: In Report function, after logging the MinMaxAve data of AI and
Math channels for one day for example, then reset historical data in order to
logging new data for the next day. It is also possible to reset MinMaxAve for
“All Channels” at one step.
Print: If Printer is connected to Paperless Recorder via USB port or Ethernet, then,
the following print jobs can be triggered from the events
Print Historical data
Print Event List
Print Report List
Print Snapshot
86
To Next Page
Loading...
Need help?
General