8 Funktionsprincipper USA.fm • Page 18Bale press
Problems with cords, straps, or steel wire:
If there are problems with cords, straps, or steel wire during the ejection of the bale, close the
doors again. But only so far as is possible without the use of other equipment!
Then press the orange finish indicator button so the platen goes back to the top position.
B-series
X-series
Open the doors and try to correct the problem.
If the doors cannot be closed, or the problem cannot be corrected, the bale must be removed
and pressed again.
To Next Page
Loading...
