EF Declaration E USA.fm • Page 1Bale press X-series
Manufacturer: Bramidan A/S
Industrivej 69
DK-6740 Bramming
Telephone: +45 75 17 32 66
Fax: +45 75 17 31 77
Internet: www.bramidan.com
EU Declaration of Conformity R205-E
Hereby declares that
Machine: Bale press belonging to the X-series
was manufactured in conformity with:
• ANSI Z245.5-2008 Baling Equipment - Safety Requirements.
• The provisions of the EU Machinery Directive 2006/42/EC with later amendments, with special reference
to Annex II, part A and Annex I of the Directive, on essential safety and health requirements in relation to
the construction and manufacture of machines.
• The provisions of the EU EMC Directive 2004/108/EC as later amended.
• The following standards:
EN 61000-6-2 EMC
EN 61000-6-3 EMC
EN 60204-1 Electrical equipment on machines.
Model X10 X16 X25 X25 AD X30 X30 AD
Type PVN PEX PEX PEX PEY PEY
Model
Type
Note
Bramidan bale presses are intended for erection as stand-alone machines and must not be combined with
other machines.
The bale press must not be used for compressing wet or oily material, foam rubber, or other strong
expansive materials.
The bale press must not be used for explosive or easily ignited waste.
I confirm the above information
Date Technical manager
Ejnar C. Christensen
01.12.2010
To Next Page
Loading...
