2
-
61
42hW-201601
CHAPTER 2 ENGINE3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
2
6. DISASSEMBLY AND SERVICE
6.1 ENGINE REMOVAL
K42W218A
K42W219A
K42W221A
K42W217A
K42W222A
1. Open the bonnet to disconnect the head lamp
wiring connector (1), gas cylinder (2). Then,
unscrew the bonnet mounting bolts (3) to remove
the bonnet.
2. Disconnect the steering cylinder hose (1), ground
wire (2), accelerator cable (3) and fuel hose (4)
from right side of the engine.
3. Disconnect the steering cylinder hose (1), hydraulic
pump suction hose (2), steering unit hose (3) and
hydraulic pipe (4) from left side of the engine.
4. Remove the start motor (1).
5. Disconnect the hydraulic suction pipe( 1), generator
wiring connector (2), coolant temperature sensor
connector (3) and DPF wiring connector (4).
A42W203A
To Next Page
Loading...
