Branson F36r - V-Belt, V-Pulley; Alternator; After-Treatment Device (Atd) [3015 R(H);3515 R(H);4015 R(H)]; Exhaust Manifold

2
-
66
42hW-201601
CHAPTER 2 ENGINE 3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
[3015R(h)/3515R(h)/4015R(h)]
K25W250A
6.2.3 V-BELT, V-PULLEY
Loosen the bolts that hold the V-pulley.
Loosen the tension bolt and the bolt that hold the
alternator, remove the V-belt after relaxation of belt.
Disassemble the V-pulley.
1.
2.
3.
K25W251A
6.2.4 ALTERNATOR
Loosen the bolt and washer that hold the upper
side of alternator.
Loosen the bolt in lower side.
Disassemble the alternator.
1.
2.
3.
K25W252A
6.2.5 AFTER-TREATMENT DEVICE (ATD)
Loosen the bolts that hold the ATD.
Loosen the nuts that connect the ATD and DPF
xing housing.
Disassemble the ATD. (When disassembling the
ATD, should be careful because ATD is heavy.)
1.
2.
3.
K25W253A
6.2.6 EXHAUST MANIFOLD
Loosen the bolts and nuts that hold the exhaust
manifold.
Disassemble the exhaust manifold and steel
gasket.
1.
2.