Branson F36r - Page 252

4
-
80
42hW-201601
CHAPTER 4 TRANSMISSION 3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
When installing the roller to the differential
case, the at end of the roller should face the
groove of the side gear.
•
K42W4B7a
U600W3A45A
U600W3A46A
K42W4B8a
U600W3A48A
K42W4C2A
5. Removethewasher(1)andsidegear(2).
6. Pull out the differential shaft 2 mounting spring
pin(1)and differentialshaft 2 (2)to removethe
piniondrivegear(3)andthrustwasher(4).
7. Removethesidegear(1)andwasher(2).

8. Installinthereverseorderofremoval.
Check the backlash of the ring gear using a
dial gauge.
Specied value
..... 0.15 ~ 0.25 mm
(0.0059 ~ 0.0098 in.)
After adjustment of backlash, there should
be no lateral free play of the differential as-
sembly. To adjust the backlash, use shims
between the ball bearing and snap ring.
•
•
