Brent 1082/882 — Set Up
2-9
Basic Set Up (continued)
Adjusting Axle from Heavy to Light Setting (continued)
6. Reposition bar spacer (280541) in the receivers in the frame. Repeat on opposite side of cart.
7. Secure the rod weldment retainer (280602) to the axle using pin (804572) and cotter pin (9391-046).
Repeat on opposite side of cart. Both retainers must be adjusted so they are loose when the grain
cart is loaded.
8. Attach the wheels to the axle and torque. Refer to the “MAINTENANCE” section for proper torque
requirements.
9. Remove supports and lower cart to ground.
(August 2014)
To Next Page
