AUTOMATIC HANDS FREE MILK TEXTURING
Automatically textures milk to the selected temperature and style from silky smooth latté to creamy cappuccino.
Automatic purge removes residual milk from the steam wand when returned to the downward position.
SIMULTANEOUS COFFEE & STEAM
Two stainless steel boilers each dedicated to espresso and steam for simultaneous milk texturing and espresso
extraction.
PRECISION CONTROL
Electronic PID Temperature Control:
Electronic temperature control delivers precise water temperature for optimum espresso flavor.
Actively Heated Group Head:
Commercial size 58mm group head with embedded element for thermal stability during extraction.
Regulated Extraction Pressure
Over pressure valve (OPV) limits maximum pressure for optimal espresso flavor.
Low Pressure Pre-Infusion
Gradually increases water pressure to gently expand grinds for an even extraction.
Dual Pumps
Dedicated Italian made espresso and steam boiler pumps.
Programmable Shot Temperature
Adjust water temperature to achieve optimal espresso flavor depending on coffee origin and degree of roast.
ADDITIONAL FEATURES
Auto Start
Switches machine on at a specified time.
Auto Off
Switches machine off after a specified time from 0.5 to 8 hours.
Assembly
BEFORE FIRST USE
Machine Preparation
Remove and discard all labels and packaging materials attached to your espresso machine. Ensure you have
removed all parts and accessories before discarding the packaging.
Remove the plastic bag containing the water filter and water filter holder. Clean parts and accessories (water tank,
portafilter, filter basket, jug) using warm water and a gentle dish washing liquid. Rinse well then dry thoroughly.
TIP: To easily manoeuvre your machine, use the drop down swivel foot located under the drip tray. When turned to
UNLOCK, the swivel foot drops down & lifts the machine upwards, making it easier to access the removable water
tank or reposition the machine to another location.
INSTALLING THE WATER FILTER
Remove the water filter and water filter holder from the plastic bag.
Soak the filter in cold water for 5 minutes.
To Next Page
Loading...
Need help?
General
