Functions
FIRST USE
1. Press POWER button to turn the machine on.
2. Follow the instructions on screen to guide you through first use setup.
3. After completing setup, the machine will tell that it is ready to use.
The machine is now in STANDBY mode.
4. Touch “Guide” and the machine will guide you step by step to make your first coffee.
Touch the and go to the Drinks Menu or < to repeat the Setup. To repeat the Guide at any time, go to Settings
Menu.
NOTE:
If your water hardness is either 4 or 5 when tested, we strongly recommend you change to an alternate water source.
Filtered, bottled spring or mineral water will extend both the life of your built-in filter and descale intervals as well as
superior taste. Please ensure to test the water hardness of the alternative water source you’ve chosen and input into
the machine accordingly. Avoid using overly filtered water, like RO water unless some mineral content is being added
back to the final water. Never use distilled water, or water with no or low mineral content as this will affect both the
taste and the functioning of your machine.
GRINDING OPERATION
Insert bean hopper into position on-top of the machine. Turn dial to lock into place.
Fill hopper with fresh beans.
TIP: We recommend quality 100% Arabica beans with a ‘Roasted On’ date stamped on the bag, not a ‘Best Before’
or ‘Use By’ date. Coffee beans are best consumed between 5–20 days after the ‘Roasted On’ date. Stale coffee may
pour too quickly from the portafilter spouts and taste bitter and watery.
DRINK SELECTION
To enter Drinks Menu screen, touch the Home icon . Swipe & select your drink. Touch the ‘Help & Tip’ icon to see
To Next Page
Loading...
Need help?
General
