8. Once the bale is in the appropriate
location, close the clamp fully and then
lower the lifting fork.
9. Back under the third bale and lift the
forks until the third bale is lightly
supporting the second bale. You will
see when to stop lifting as the clamped
bale will tilt forward slightly.
10. When the first bale has been processed
and the third bale is still lightly
supporting the second, open the clamp
to release the second bale. Once the
clamp is opened, lift the fork until the
third bale pushes the second bale into
the tub.
11. Once the second bale is processed, the
fork can be fully lifted to load the third
bale into the tub.
To Next Page
Loading...