brim Trio Multibrew System - 24 Hour Clock; Programming Future Brew

16
24 Hour Clock
NOTE: It is not necessary to set the CLOCK to brew coffee.
1. Press and hold the HOUR or the MIN button for 3 seconds to initiate the CLOCK setting
mode. The LCD will illuminate and CLOCK will appear on the screen.
ThedefaultTIME“12:00PM”orthe.currentsetTIMEwillash.
2. PresstheHOURbuttonuntilthecurrentHOURashes.HoldtheHOURbuttontofast
advance.
NOTE: Pay attention to AM and PM.
3. PresstheMINUTESbuttonuntilthecurrentMINUTESareashing.HoldtheMINUTESbuttonto
fast advance.
4. PresstheBREWPROGRAM/OFFbuttontoconrm.ThecurrentTIMEwillbedisplayed.
NOTE: The screen will darken and revert back to the last CLOCK setting in 20 seconds if no
further buttons are selected.
Programming Future Brew
1. Press and hold the BREW PROGRAM/OFF button for 3 seconds to initiate future brew
PROGRAM setting mode. The LCD will illuminate and PROGRAM will appear on the screen.
ThedefaultfuturebrewTIME“12:00PM”willash.
2. PresstheHOURbuttonuntilthedesiredfuturebrewHOURashes.HoldtheHOURbuttonto
fast advance.
NOTE: Pay attention to AM and PM.
3. PresstheMINUTESbuttonuntilthedesiredfuturebrewMINUTESareashing.Holdthe
MINUTES button to fast advance.
4. PresstheBREWPROGRAM/OFFbuttontoconrm.ThenewlyprogrammedfuturebrewTIME
will be displayed and PROGRAM will appear on the screen and the BREW PROGRAM/OFF
buttonwillash.
NOTE: The screen will darken and revert back to the last future brew TIME in 20 seconds if no
further buttons are selected.
SO-315939_50017 BRIM Trio MultiBrew IM R2.indd 16 2019-03-07 1:46 PM