19
Carafe Brew Cycle
IMPORTANT:Foroptimalbrewedavor,lteredwaterispreferred.
IMPORTANT: Before brewing, always check to make sure water level is past the MIN 2 cup step
and add water if needed. Never exceed the MAX 12 cup step.
NOTE: The amount of brewed coffee will always be less than the amount of water placed
intothewatertank;asmuchas10%isabsorbedbycoffeegroundsandlter.Theglass
carafe markings indicate the amount of water needed in the water tank to produce the
corresponding cups of brewed coffee.
1. Use the front tab to open the 12 cup water tank lid.
2. Pressthecarafelidhandletoopen.Makesuretheavorinfusiontubeisingoodcondition
beforebrewingcoffee.Fillcarafewiththedesiredamountofcoldlteredwaterandpour
into the 12 cup water tank at the back of the unit. The stepped water level indicator can be
easily viewed inside the unit. Make sure the water level exceeds the MIN 2 cup step and is
notlledpasttheMAX12cupstep.
3. Center the empty carafe on the warming plate.
4. Lowerandrotatethelterholderuntilthelterholder’sroundtabdropsdownintothehousing.
5. Placethegoldtonecoffeelterintotheremovablelterholder.Measure2level
tablespoons or 1 scoop of drip or regular ground coffee for each cup of coffee desired.
For stronger or milder coffee, adjust amount of coffee or type of roast to suit your taste.
6. Close the Coffee Maker lid.
7. Plug the power cord into a 120V AC electrical outlet; the backlighted screen will illuminate,
the default REGULAR (
) brew strength and LOW ( L ) carafe temperature will appear on
thedisplay.CLOCKand“12:00PM”willashastheCoffeeMakeradvancestoCLOCK
setting mode.
NOTE: It is not necessary to set the CLOCK to brew coffee.
8. To begin brewing coffee immediately, press the BREW PROGRAM/OFF button. The button
will illuminate solid white, the backlighted screen will illuminate.
SO-315939_50017 BRIM Trio MultiBrew IM R2.indd 19 2019-03-07 1:46 PM