brim Trio Multibrew System - Keep Warm Cycle; Auto Shut Off

18
Keep Warm Cycle
1. After brewing, the Coffee Maker will advance to a 2:00 hour KEEP WARM cycle. KEEP WARM
may be pre-programmed from 0:00 to 4:00 hours in 15 minute increments at any time either
before or during brewing.
2. To change, press and hold the STRENGTH/KEEP WARM button for 3 seconds. The screen will
illuminate.LastprogrammedKEEPWARMtimewillbegintoash.
3. PresstheHOURbuttonuntilthedesiredHOUR(0:00to4:00)ashes.
4. Press the MINUTES button to increase or decrease KEEP WARM TIME in 15 minute increments.
5. PresstheBREWPROGRAM/OFFbuttontoconrm.
NOTE: The screen will darken and revert back to the last KEEP WARM TIME in 20 seconds if no
further buttons are selected.
Auto Shut Off
The Coffee Maker will automatically shut OFF once the KEEP WARM TIME has elapsed
after brewing.
SO-315939_50017 BRIM Trio MultiBrew IM R2.indd 18 2019-03-07 1:46 PM