brim Trio Multibrew System - Single Serve Hot Beverages

26
2. Fill the reusable ground coffee adaptor. It is recommended to use 1 tablespoon of ground
coffeeforevery6oz.cupofwater.DONOTEXCEEDthe15oz.MAXllstep.
3. With the handle facing front, place the ground
coffee adaptor into the adaptor compartment.
Slide the adaptor handle in to the grooves at the
front of the Coffee Maker. (See Figure 9.)
4. Presstheadaptorcompartment’sliddownrmly
to lock.
5. Plug the Coffee Maker into a 120V AC electrical
wall outlet.
6. Press the GROUND COFFEE button to begin the
brew cycle.
7. To interrupt the brewing cycle at any time,
press the GROUND COFFEE button.
8. At the end of the cycle, the Coffee Maker and all indicator lights will automatically turn OFF.
9. Allow unit to cool before removing the ground coffee adaptor to discard used
coffee grounds.
10. Unplug the BRIM Trio Multibrew System when not in use.
Single Serve Hot Beverages
Boiling plain water in your BRIM Trio Multibrew System is quick and easy. Water is dispensed at
the perfect temperature for preparing single cups of bagged teas, instant soups, quick cooking
oats, packaged hot chocolate, hot apple cider or anything that requires boiling water.
WARNING: Beforebrewing,itisrecommendedthewatertankbelledatleasttothelowest
6 oz. step.
To avoid damage to your Coffee Maker, never operate your Coffee Maker when the water
tankisempty.DONOTEXCEEDthe15oz.MAXllstep.
IMPORTANT:Topreventtaintedor“off”avorswhenchanginghotbeverages,whiletheunitis
OFF, use a damp paper towel to completely remove any residue from the adaptor compartment.
Figure 9
SO-315939_50017 BRIM Trio MultiBrew IM R2.indd 26 2019-03-07 1:46 PM