Why is the cold water not cold in my BRIO 300?
It can take up to one hour after setting up your BRIO Water Dispenser to dispense cold water. Ensure the power cord is correctly connected to a working outlet, the green power switch on the back is On, and the back of the dispenser has at least 20 cm of free airflow on all sides.
Why is the hot water not hot in my BRIO 300?
It typically takes 15-20 minutes after setting up your BRIO Water Dispenser to dispense hot water. Check that the power cord is properly connected to a working outlet and the red power switch on the back of the dispenser is turned On.
Why is my BRIO Water Dispenser so noisy?
Make sure that your BRIO Water Dispenser is on a level surface. Also, the heating tube may generate a slight noise, which is normal.
How to fix the night light on a BRIO 300?
Ensure that the power cord of your BRIO Water Dispenser is properly connected to a working outlet and that the night light power switch on the back of the dispenser is On.
Covers essential safety guidelines for assembly, installation, operation, and maintenance to prevent injury and damage.
Specific safety instructions related to the UV light source, including disconnection and disposal.
Details the suitable environments for the water dispenser, including homes and offices.
Specifies limitations for use by individuals with reduced physical or mental capabilities.
Identifies and describes all external and internal components of the water dispenser.
Explains the meaning of each indicator light on the control panel.
Provides the height, width, and depth measurements of the water dispenser.
Details the dispensing temperatures, tank capacities, and flow rates for hot and cold water.
Lists all items included in the product package with quantities.
Specifies the tools required for installation and setup.
Guidance on selecting an appropriate and safe location for the water dispenser.
Step-by-step instructions for connecting the dispenser to the cold water line.
Procedure for flushing the filters to remove any residual particles or air.
Instructions for inserting filters and finalizing the water supply connections.
Steps to power the water dispenser on and off correctly.
Instructions on how to dispense cold water from the unit.
Procedure to safely dispense hot water using the child safety lock.
Addresses common operational problems and provides step-by-step solutions.
Outlines scheduled tasks like sanitizing and mineral deposit removal.
Detailed steps for cleaning the internal and external parts of the dispenser.
Details filter types, replacement intervals, and their specific functions.
Step-by-step guide for replacing used filters and resetting the indicator.
Provides detailed specifications including capacity, flow rate, PSI, and temperature.
Provides essential tips for maintaining the dispenser's condition and longevity.
Details the terms, conditions, and duration of the product's limited warranty.
Lists conditions and damages not covered by the product's warranty.
Covers essential safety guidelines for assembly, installation, operation, and maintenance to prevent injury and damage.
Specific safety instructions related to the UV light source, including disconnection and disposal.
Details the suitable environments for the water dispenser, including homes and offices.
Specifies limitations for use by individuals with reduced physical or mental capabilities.
Identifies and describes all external and internal components of the water dispenser.
Explains the meaning of each indicator light on the control panel.
Provides the height, width, and depth measurements of the water dispenser.
Details the dispensing temperatures, tank capacities, and flow rates for hot and cold water.
Lists all items included in the product package with quantities.
Specifies the tools required for installation and setup.
Guidance on selecting an appropriate and safe location for the water dispenser.
Step-by-step instructions for connecting the dispenser to the cold water line.
Procedure for flushing the filters to remove any residual particles or air.
Instructions for inserting filters and finalizing the water supply connections.
Steps to power the water dispenser on and off correctly.
Instructions on how to dispense cold water from the unit.
Procedure to safely dispense hot water using the child safety lock.
Addresses common operational problems and provides step-by-step solutions.
Outlines scheduled tasks like sanitizing and mineral deposit removal.
Detailed steps for cleaning the internal and external parts of the dispenser.
Details filter types, replacement intervals, and their specific functions.
Step-by-step guide for replacing used filters and resetting the indicator.
Provides detailed specifications including capacity, flow rate, PSI, and temperature.
Provides essential tips for maintaining the dispenser's condition and longevity.
Details the terms, conditions, and duration of the product's limited warranty.
Lists conditions and damages not covered by the product's warranty.
General| Brand | BRIO |
|---|---|
| Model | 300 Series |
| Category | Water Dispenser |
| Language | English |
To Next Page