10
4� Connect to the Cold Water Supply
CAUTION: DO NOT CONNECT THIS WATER LINE TO A HOT WATER SUPPLY LINE. The water supply to the
unit MUST be from the COLD WATER LINE. Using HOT WATER will severely damage your filters.
A� Turn o and then disconnect the current cold
water supply line.
B� Connect the feed water adapter (E) to the cold
water supply line.
C� Connect the cold water supply line on top of
the feed water adapter (E).
NOTE: An extra adapter nut is included on top
of the feed water adapter (E) to attach to
a 3/8 in. or 1/2 in. feed plumbing line.
E
D� Cut the shut o valve with tube (B) where
indicated using the tubing cutter(M).
E� Connect the two cut ends of the tubing straight
into each end of the pressure-reducing valve
(L). Ensure that the arrow will be pointing
towards the flow of water into the dispenser
when the shut o valve with tube (B) is
connected in the next steps.
B
L
F� Insert the shut o valve with tube (B) straight
into the quick connector piece of the feed
water adapter (E).
E
B
G� Gently tug on the tube (B) to ensure a secure
connection with the feed water adapter (E).
E
B
To Next Page
Loading...
