General Information
This product satisfies the requirements of the Water Supply (Water Fittings) Regulations 1999
and current bylaws and is designed to be used within systems designed to BS 6700.
BS 6700 recommends the temperature of stored water should never exceed 65ºC. A stored water
temperature of 60ºC is considered sufficient to meet all normal requirements and will minimise
the build up of lime scale in hard water areas
If the shower valve is installed at low pressure (tank fed), then the minimum distance from the
highest installed position of the shower valve to the underside of the cold tank should be at least
5 metres to ensure adequate performance.
This shower valve should be installed in compliance with the Water Regulations. For further
details contact you Local Water Authority.
04
To Next Page
Loading...
