Bristol 428 - Config: 6; M O D E   C H a N G E S E L E C T

Model 428 User’s Manual OPERATION
Bristol Instruments, Inc. 23
Configuration Screen 6
Displays various details about the instrument. With the exception of the IP
Address, these parameters are fixed, and may not be edited.
W a v e l e n g t h M e t e r
M o d e l 4 2 8 A
V e r 0 . 7 9 / 1 . 0 6
S N 1 1 0 9
P o w e r U p s : 1 6
H o u r s – 2 5 . 5 0
I P A d d r : 1 9 2 . 1 6 8 . 1 . 1 0 9
Config: 6
Config
M o d e


C h a n g e
S e l e c t
Figure 3.16: Configuration Screen 6
 Model – Displays the type and model number of the instrument.
 Ver – Displays the instrument’s current embedded software and firmware
versions.
 Power Ups – Displays the number of times the instrument has been
powered on.
 IP Address – Displays the IP Address currently used for remote
communications via the Ethernet interface. This parameter can be changed
from the Configuration Screen 5.
 SN – Displays the serial number of the instrument.
 Hours – Displays the total number of hours that the system has been
powered on.