Bristol 428 - Page 61

Model 428 User’s Manual REMOTE COMMUNICATIONS
Bristol Instruments, Inc. 61
UNIT Subsystem
For the instrument, there is a single query and command in the UNIT subsystem { XE
“Commands:UNIT: }. This is used to query and change the units that the SCPI interface
uses for reporting power.
UNIT Subsystem Functions
:UNIT:POWer?
Description
Queries the state of the power units that will be used when the SCPI
interface returns power values.
Query Response
{ DBM | MW }
Examples
:UNIT:POW?
:UNIT:POWer {DBM | MW}
Description
Sets the state of the power units that will be used when the SCPI
interface returns power values. This setting does not affect the display.
*RST value
DBM
Examples
:UNIT:POW DBM
:UNIT:POW MW