16
6.0 Troubleshooting
The Brivis Touch Controller comes with in-built diagnostics to
assist in determining the cause of a fault
With some faults the system will attempt to automatically restart,
often several times
Critical faults, where the equipment cannot automatically restart,
will require a service call
Refer to the Troubleshooting section of the Brivis product
Installer Manual for specific equipment related issues before
calling for service
6.1 Power Outages
If power is restored within 10 minutes of a power outage, the
Brivis Touch Controller will resume normal operation with the
mode and settings immediately before the outage.
When powered OFF, the controller will retain its Day and Time
setting for up to 5 days.
To Next Page
Loading...
