Fibre Channel Over Ethernet: Broadcom NetXtreme II® Network Adapter User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/fcoe.htm[9/5/2014 3:45:12 PM]
4. On some platforms, you may need to set the boot protocol through system BIOS configuration in the integrated devices pane as described above.
For all other devices, set the Boot Protocol field to FCoE in the MBA Configuration Menu through CCM.
5. Configure the desired boot target and LUN. From the Target Information Menu, select the first available path.
To Next Page
Loading...