Broadcom NetXtreme II SERIES User Manual

Using Broadcom Advanced Control Suite 4: Broadcom NetXtreme II® Network Adapter User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/bacs.htm[9/5/2014 3:45:16 PM]
Displays the operating system, including the version.
Platform
Displays the hardware architecture platform (for example, 32-bit or 64-bit)
Information Tab: iSCSI Initiator
The iSCSI Initiator section of the Information tab is available if iSCSI is enabled on the host.
Name
Displays the iSCSI initiator name in IQN format.
Portal List
Displays all iSCSI portal IP addresses configured on the selected host.
NOTE: Some information may not be available for all Broadcom network adapters.
To configure the host
Select the host in the Explorer View pane, and then select the Configuration tab to configure host-level parameters.
Configuration Tab: System Management
Chimney Offload State
Enable or disable chimney offload at the host level, rather than at the device level, and then click Apply.
Configuration Tab: iSCSI Initiator
Name

Broadcom NetXtreme II SERIES Specifications

General

Brand	Broadcom
Model	NetXtreme II SERIES
Category	Network Card
Language	English