Fibre Channel Over Ethernet: Broadcom NetXtreme II® Network Adapter User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/fcoe.htm[9/5/2014 3:45:12 PM]
13. Click OK to proceed and complete installation.
RHEL6 Installation
1. Boot from the installation medium.
2. For RHEL6.3, an updated Anaconda image is required for FCoE BFS. That updated image is provided by Red Hat at the following URL
http://rvykydal.fedorapeople.org/updates.823086-fcoe.img.
3. For RHEL6.3, on the installation splash screen, press Tab and add the options dd updates=<URL_TO_ANACONDA_UPDATE_IMAGE> to the boot command line. Please refer to the
RedHat Installation Guide Section 28.1.3 (http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Installation_Guide/ap-admin-options.html#sn-boot-options-
update) for details about installing the Anaconda update image. Press Enter to proceed.
4. For RHEL6.4 and above, no updated Anaconda is required. On the installation splash screen press Tab and add the option dd to the boot command line, as shown in the following
screen. Press Enter to proceed.
To Next Page
Loading...