Data Center Bridging (DCB): Broadcom NetXtreme II® Network Adapter User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/dcb.htm[9/5/2014 3:45:14 PM]
of Service in the NDIS advance properties page.
NOTE: Broadcom recommends that you do not install the DCB feature if SR-IOV will be used. If you install the DCB
feature, be aware that selecting Enable single-root I/O virtualization (SR-IOV) in Virtual Switch Manager will force the
underlying adapter into a DCB state in which OS DCB configuration will be ignored, and DCB configuration from BACS will be
in effect with the exception that the user-configured Networking Priority value (non-zero) will not take effect, even though
it appears that it is from BACS.
Please read all Restrictions and Disclaimers.
Back to Contents Page
To Next Page
Loading...