Brocade FastIron GS and FastIron GS-STK Hardware Installation Guide 77
53-1001783-01
Power supply specifications
6
DRAFT: BROCADE CONFIDENTIAL
A FastIron GS or GS-STK POE device with dual power supplies may not provide redundancy,
depending on how much power the POE ports are consuming. Refer to “Power specifications for
POE” on page 15.
Remove the power cord from a power supply before you install it in or remove it from the device.
Otherwise, the power supply or the device could be damaged. The device can be running while a
power supply is being installed or removed, but the power supply itself should not be connected
to a power source.
All power supplies are auto-sensing and auto-switching.
Key features
Refer to “Power supplies” on page 14 for the key features of the FGS power supplies.
Physical dimensions and weight
Environmental considerations
For optimal performance, operate or store the power supplies in compliance with the following
environmental conditions.
TABLE 18 Physical Dimensions and Weight of Power Supplies
Power Supply Dimensions Weight
RPS-FGS
RPSDC-FGS
6.25 cm (H) x 22.03 cm (W) x 19.30 cm (D)
2.46 in (H) x 8.67 in (W) x 7.6 in (D)
3.016 kg (6.65 lbs)
2.72 kg (6 lbs)
TABLE 19 Power Supply Operating and Storage Environment
Description Range
Operating Environment
Operating temperature 32° – 104° F (0° – 40° C)
Relative humidity 0 – 95%, non-condensing
Operating altitude Up to 10,000 feet above sea level
Operating noise 47 – 51 dBA
Cooling
• AC: internal fans, 50mm
• DC: internal fan, 60 mm
Storage Environment
Storage temperature -40° to 185° F, -40° to 85° C
Storage humidity 95% maximum, non-condensing
Storage altitude Up to 15,000 feet above sea level