Brother 8840DN - B/W Laser - All-in-One User Manual

6 - 5 SETUP SEND
Automatic transmission
This is the easiest way to send a fax.
1 If it is not illuminated in green, press (Fax). Place the
original face up in the ADF, or face down on the scanner glass.
2 Enter the fax number using the dial pad, One-Touch,
Speed-Dial or Search.
(See One-Touch Dialing on page 7-5 and Speed-Dialing on
page 7-6.)
3 Press Start.
4 If you are using the scanner glass, press 2 or Start.
Sending a fax at the end of a conversation
At the end of a conversation you can send a fax to the other party
before you both hang up.
1 Ask the other party to wait for fax tones (beeps) and then to
press Start before hanging up.
2 If it is not illuminated in green, press (Fax). Place the
original face up in the ADF, or face down on the scanner glass.
Press Start.
The LCD shows:
3 Press 1 to send the fax.
4 Replace the external handset.
You must not pick up the handset of the external phone or press
Hook to listen for a dial tone.
Send or Receive?
▲ 1.Send
▼ 2.Receive
Select
▲▼ & Set
Downloaded from ManualsPrinter.com Manuals

Brother 8840DN - B/W Laser - All-in-One Specifications

General

Functionality	All-in-One
Print Speed (Black)	40 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Monthly Duty Cycle	50, 000 pages
Connectivity	USB, Ethernet
Display	LCD
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux
Printer Type	Laser
Paper Capacity	300 sheets
Scanner Type	Flatbed
Max Paper Size	Legal
Memory	64 MB