SETUP SEND 6 - 10
Real Time Transmission
When you are sending a fax, the MFC will scan the originals into the
memory before sending. Then, as soon as the phone line is free, the
MFC will start dialing and sending.
If the memory becomes full, the MFC will send the original in real
time (even if Real Time TX is set to Off).
Sometimes, you may want to send an important original immediately,
without waiting for memory transmission. You can set
Real Time TX to On for all originals or for the next fax only.
If you want to fax multiple pages, use ADF.
1
If it is not illuminated in green, press (Fax). Place the
original face up in the ADF, or face down on the scanner glass.
2
Press Menu, 2, 2, 5.
3
To change the default setting,
press or to select On (or
Off).
Press
Set.
Go to Step 5.
—OR—
For the next fax transmission only, press or to select
Next Fax Only.
Press
Set.
4
Press or to select Next Fax:On
(or Next Fax:Off).
Press
Set.
5
Press 1 if you want to choose more settings and the LCD will
return to the Setup Send menu.
—OR—
Press
2 if you have finished choosing settings for this page, and
then go to Step 6.
6
Enter the fax number.
7
Press Start to send the fax.
In Real Time Transmission using the scanner glass, the auto
redial function doesn't work.
22.Setup Send
5.Real Time TX
▲ Next Fax Only
▼ On
Select
▲▼ & Set
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
