Brother 8840DN - B/W Laser - All-in-One User Manual

1 - 11 INTRODUCTION
Status LED indications
The Status LED (Light Emitting Diode) will flash and change color
depending on the MFC status.
The LED indications shown in the table below are used in the
illustrations in this chapter.
LED LED status
LED is off.
Green Yellow Red
LED is on.
Green Yellow Red
LED is blinking.
LED MFC status Description
Sleep Mode The power switch is off or the MFC is in Sleep
mode.
Green
Warming Up The MFC is warming up for printing.
Green
Ready The MFC is ready to print.
Yellow
Receiving Data The MFC is either receiving data from the
computer, processing data in memory or
printing data.
Yellow
Data Remaining in
Memory
Print data remains in the MFC memory.
Downloaded from ManualsPrinter.com Manuals

Brother 8840DN - B/W Laser - All-in-One Specifications

General

Functionality	All-in-One
Print Speed (Black)	40 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Monthly Duty Cycle	50, 000 pages
Connectivity	USB, Ethernet
Display	LCD
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux
Printer Type	Laser
Paper Capacity	300 sheets
Scanner Type	Flatbed
Max Paper Size	Legal
Memory	64 MB