Brother 8840DN - B/W Laser - All-in-One User Manual

AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 7
Access codes and credit card numbers
Sometimes you may want to choose from several long distance
carriers when you make a call. Rates may vary depending on the
time and destination. To take advantage of low rates, you can store
the access codes or long-distance carriers and credit card numbers
as One-Touch and Speed-Dial numbers. You can store these long
dialing sequences by dividing them and setting them up on separate
keys in any combination. You can even include manual dialing using
the dial pad.
The combined number will be dialed in the order that you entered it
as soon as you press
Start.
(See Storing One-Touch Dial numbers on page 7-1.)
For example, you can store ‘555’ on One-Touch key 03 and ‘7000’
on One-Touch key 02. If you press One-Touch key
03, One-Touch
key 02, and Start, you will dial ‘555-7000’.
To temporarily change a number, you can substitute part of the
number with manual dialing using the dial pad.
For example, to change the number to 555-7001 you could press
One-Touch key
03 and then press 7001 using the dialing pad.
If you must wait for another dial tone or signal at any point in the
dialing sequence, store a pause there in the number by pressing
Redial/Pause. Each key press adds a 3.5-second delay.
Downloaded from ManualsPrinter.com Manuals

Brother 8840DN - B/W Laser - All-in-One Specifications

General

Brand	Brother
Model	8840DN - B/W Laser - All-in-One
Category	All in One Printer
Language	English