Brother ADS-3100 - Replace the Roller Kit

Home > Routine Maintenance > Replace Supplies > Replace the Roller Kit
Replace the Roller Kit
Your machine is equipped with a scan counter that automatically counts how many times the machine has
scanned. After approximately 100,000 scans, you may need to replace the Roller Kit.
After replacing the rollers, reset the Usage Counter so that the machine starts counting from 0.
A
Lower Pick Up Roller
B
Upper Pick Up Roller
C
Brake Roller
1. Remove the ADF.
2. Press the release tab to open the Front Cover.
3. Press the right side of the Pick Up Roller Cover toward the left and pull it down.
212