Home > Scan > Scan from Your Computer (Windows) > Scan Using Nuance
™
PaperPort
™
14SE or Other
Windows Applications
Scan Using Nuance
™
PaperPort
™
14SE or Other Windows Applications
You can use the Nuance
™
PaperPort
™
14SE application for scanning.
• To download the Nuance
™
PaperPort
™
14SE application, click (Brother Utilities), select Do More in
the left navigation bar, and then click PaperPort.
• For detailed instructions on using each application, click the application's Help menu, and then click
Getting Started Guide in the Help ribbon.
The instructions for scanning in these steps are for Nuance
™
PaperPort
™
14SE. For other Windows
applications, the steps will be similar. Nuance
™
PaperPort
™
14SE supports both TWAIN and WIA drivers;
the TWAIN driver (recommended) is used in these steps.
1. Load your document.
2. Start Nuance
™
PaperPort
™
14. Do one of the following:
• Windows 10
Click
> Nuance PaperPort 14 > PaperPort.
• Windows 8.1
Click (PaperPort).
• Windows 7
Click
(Start) > All Programs > Nuance PaperPort 14 > PaperPort.
3. Click the Desktop menu, and then click Scan Settings in the Desktop ribbon.
The Scan or Get Photo panel appears on the left side of the screen.
4. Click Select.
5. From the available Scanners list, select TWAIN: TW-Brother ADS-XXXXX or TWAIN: TW-Brother ADS-
XXXXX LAN (where XXXXX is the model name of your machine). To use the WIA driver, select the Brother
driver that has "WIA" as the prefix.
6. Click OK.
7. Select the Display scanner dialog box checkbox in the Scan or Get Photo panel.
8. Click Scan.
The Scanner Setup dialog box appears.
76
To Next Page
Loading...
