Web Based Management appears.
4. If required, type the password in the Login field, and then click Login.
5. If you want to pin the navigation menu on the left side of the screen, click
and then click .
You can now change the machine settings.
If you change the protocol settings, you must restart the machine after clicking Submit to activate the
configuration.
After configuring the settings, click Logout.
Start from Brother Utilities (Windows)
1. Launch (Brother Utilities), and then click the drop-down list and select your model name (if not already
selected).
2. Click Tools in the left navigation bar, and then click Machine Settings.
Web Based Management appears.
3. If required, type the password in the Login field, and then click Login.
4. If you want to pin the navigation menu on the left side of the screen, click
and then click .
You can now change the machine settings.
If you change the protocol settings, you must restart the machine after clicking Submit to activate the
configuration.
After configuring the settings, click Logout.
Related Information
• Change Machine Settings Using Web Based Management
Related Topics:
• Create a Self-signed Certificate
• Install the Self-signed Certificate for Windows users with Administrator Rights
231
To Next Page
Loading...
