Option Description
After scanning the first batch of documents, press
Continue to scan additional pages. When finished
scanning, press Complete.
Color Tone Adjustment
Adjust the brightness and contrast.
Adjust Auto Color Detect
When Color Setting is set to Auto, you can adjust
the detection level of color.
Skip Blank Page Sensitivity
Select the sensitivity level for detecting blank pages in
the scanned data. The higher the sensitivity, the easier
it is for the machine to detect blank pages.
Margin Settings
Adjust the scanning position of documents if the output
position of the images has shifted or if the images are
squeezed together or stretched vertically.
Set New Default
Save your settings as the default settings.
Factory Reset
Restore all settings back to the factory settings.
To save the settings as a shortcut, press [Save as Shortcut].
6. Press [OK].
7. Press [Start].
The machine starts scanning.
Related Information
• Scan Using the Scan Functions on Your Brother Machine
• Use TX Verification Mail
50
To Next Page
Loading...
