BE-1204B-BC • BE-1206B-BC 1-5
Chapter 1 An Introduction of Embroidery Machine
Relationship among Programs
When the software is started, the program (1) for actuating the machine starts first.
Next, embroidery data is called by the program (2). Use the program (3), when required, for editing
and embroidering. The embroidery data is totaled by the program (4).
The programs (2), (3), and (4) can be started from the menu of the program (1). Each program can
also be started independently.
W1357Q
2-3 Notes on use
• Do not start other application software while the machine controller is used.
• Do not set the screen saver.
To cancel setting, select the "Screen saver" on the "Control panel" screen and set "Not used".
• Set the computer not to use the system agent included in the Windows 95 PLUS.
2-4 Help
The software is equipped with an on-line help function as an accessory.
Click
, then the icon of the desired item. A message is displayed to explain the meaning and
usage of the item. Pressing the [F1] key brings up the help screen of the application for your
reference.
To Next Page
Loading...
Need help?
General
