Chapter 8 Creating Production Report
BES-962BC • BES-1262BC
204
Displaying Report
Displays the machine operation status in the form of report.
The following reports can be displayed:
Details Displays detail data while the machine is in operation.
Thread Breakage
Displays the thread breakage information for each machine.
information on Needle Bar
Thread Breakage
Displays the thread breakage information for each pattern.
information in Pattern
Output information
Displays production output or efficiency of the selected machine.
Total output information Displays production output or efficiency of multiple machines.
Items to be displayed in each report can be set. For details, refer to "Setting
Display Items" (
page 211).
1. Select the desired report from View menu or on the tool bar.
2. Select [Open] from File menu or click
.
3. Select the applicable machine.
4. Click [OK].
5. Specify the period to read.
For more information, refer to "General" in "Setting Display Items" on page 211.
6. Click [OK].
The report appears.
Click here to select the
machine for total output
information. Click here
again to cancel the
selection.
Click here to select the
machine for detail data,
thread breakage and
output information.
To Next Page
Loading...
Need help?
General
