1
4
ACCESSORIES
Included accessories
After opening the box, check that the following
accessories are included. If any item is missing or
damaged, contact your dealer.
(For U.S.A. only)
• Foot controller: Model T
• This foot controller can be used on the machine
with product code 888-E35. The product code is
mentioned on the machine rating plate.
• The screw of the presser foot holder is available
through your authorized dealer. (Part code:
XG1343-001)
• The included accessories vary depending on the
machine model.
1.
J
2.
A
3.
G
4.
N
5.
I
6.
R
7.
M
M
8. 9.
10. 11.
12.
90 / 14 1 ne e dle
13. 14.
15. 16. 17.
18. 19.
No. Part Name
Part Code
Americas
Others
1 Zigzag foot “J” (on machine) XZ5134-001
2 Buttonhole foot “A” XC2691-033
3 Overcasting foot “G” XC3098 -031
4 Monogramming foot “N” XD0810-031
5 Zipper foot “I” X59370-021
6 Blind stitch foot “R” XE2650-001
7 Button tting foot “M” XE2137- 001
8 Seam ripper XZ5082-001
9
Bobbin (4)
(One is on machine.)
SA156
SFB:
XA5539-151
10 Needle set XC8834-021
11 Twin needle 131096-121
12
Ball point needle
(gold colored)
XD0360-021
13 Cleaning brush X59476- 051
14 Disc-shaped screwdriver XC1074 - 051
15 Spool cap (large) 130012-024
16
Spool cap (medium)
(on machine)
XE1372- 001
17 Spool cap (small) 130013-124
18 Extra spool pin XE2241-001
19 Foot controller
XD0501-121 (EU area)
XC8816-071
(Other areas)
Mem
• About zigzag foot “J”;
Press the black button when it is difficult for thick
seams to be fed, for example, at the beginning of
sewing thick fabrics. (Page 29)
1 Black button
75/11 1 needle
90 / 14 1 ne e dle
100/16 1 needle
KNOWING YOUR SEWING MACHINE
To Next Page
Loading...
Need help?
General
Weight and Dimensions
