Brother DCP-115C Quick Start Guide

Installing the Driver & Software
26
STEP2
Macintosh
®
Network
Macintosh
®
For Mac OS
®
9.1 to 9.2
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-9.
1 Disconnect the machine form the power
socket.
2 Turn on your Macintosh
®
.
3 Put the supplied CD-ROM into your CD-ROM
drive.
4 Double-click the Start Here OS 9.1-9.2 icon to
install the printer and scanner drivers. If the
language screen appears, choose your
language.
5 Click MFL-Pro Suite to install.
6 Follow the on-screen instructions, and restart
your Macintosh
®
.
7 Lift the scanner cover to its open position.
8 Connect the network cable to the LAN socket
marked with a symbol. You will find the
LAN socket above and to the left of the ink
cartridge slots, as shown below.
9 Carefully guide the network cable into the
trench as shown below, following the trench
around and toward the back of the machine.
Then, connect the cable to your network.
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
In case of using both USB and LAN cables, route
both cables through the trench.
10 Lift the scanner cover to release the lock.
Gently push the scanner cover support down
and close the scanner cover.
11 Turn on the machine by plugging in the power
cord.

Brother DCP-115C Specifications

General

Print Technology	Inkjet
Print Resolution	Up to 1200 x 6000 dpi
Interface	USB 2.0
Paper Input Capacity	100 sheets
Functions	Print, Copy, Scan
Max. Black Print Speed (ppm)	20 ppm
Max. Color Print Speed (ppm)	15 ppm
Scanner Type	Flatbed
Grayscale Depth	8-bit
Reduction/Enlargement	25% - 400%
Scan Resolution	Optical: Up to 600 x 2400 dpi
Media Types	Envelopes, plain paper, photo paper
Operating System Support	Windows, Mac
Copy Speed Color	11 ppm
Paper Sizes	A4, A5, A6, B5, Letter
Copy Resolution	Up to 1200 x 1200 dpi