How to fix 'Size mismatch' error on Brother DCP-1600E All in One Printer?
If your Brother All in One Printer displays a 'Size mismatch' error, it means that the paper in the tray is not the correct size. Load the correct size of paper in the tray and set the size of paper to the tray.
What does 'Self-Diagnostic' mean on my Brother DCP-1600E All in One Printer?
If your Brother All in One Printer shows 'Self-Diagnostic', it could be due to the fuser unit's temperature not rising to the specified level within the required time. Turn the machine off, wait a few seconds, and then turn it back on. Leave the machine idle for 15 minutes with the power on.
What to do if my Brother DCP-1600E All in One Printer shows 'Comm.Error'?
If you encounter a 'Comm.Error' on your Brother All in One Printer, it indicates a communication error likely caused by poor telephone line quality. Try sending the fax again.
General| Brand | Brother |
|---|---|
| Model | DCP-1600E |
| Category | All in One Printer |
| Language | English |
To Next Page
