1.3.11.3.188 Print tesPrint test (functiot (function code: 67)n code: 67)
<Function><Function>
This function is used to conduct paper feed and eject tests while printing patterns.This function is used to conduct paper feed and eject tests while printing patterns.
<Operating Procedure><Operating Procedure>
DCP-15** series, MFC-18** seriesDCP-15** series, MFC-18** series
(1(1)) NuNumemeriric kec key pay pad mod modedelsls
Press the [6] and [7] buttons in this order in the initial state of maintenance mode.Press the [6] and [7] buttons in this order in the initial state of maintenance mode.
Non-numeric key pad modelsNon-numeric key pad models
PrPresess ths the [e [ ] or ] or [[ ] bu] butttton ton to dio dispsplalay “My “MAIAINTENTENANANCNCE 67E 67” on ” on ththe LCe LCD anD and prd presess ths thee
[OK] button.[OK] button.
(2)(2) “P“PAPER FEED TESTAPER FEED TEST” is displ” is displayed on the Layed on the LCD and thCD and the lattice lattice pattern ie pattern is printes printedd
continuously.continuously.
(3)(3) Press the [SPress the [Stop/Exitop/Exit] button to stot] button to stop printinp printing. Printing of thg. Printing of the test pattere test pattern is stoppedn is stopped, and, and
the machine returns to the initial state of maintenance mode.the machine returns to the initial state of maintenance mode.
To Next Page
Loading...
