Brother DCP-540CN - Page 11

Installing the Driver & Software
10
STEP2
Windows
®
Windows
®
Network
For Network Interface Users (DCP-540CN only)
(For Windows
®
98/98SE/Me/2000 Professional/XP/XP Professional
x64 Edition)
1 Disconnect the machine from the power
socket.
2
3
4
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
5
6 Turn on the machine by connecting the power
cord.
7 Turn on your computer.
(For Windows
®
2000 Professional/XP/
XP Professional x64 Edition, you must be
logged on with Administrator rights.)
Close any applications running before installing
the MFL-Pro Suite.
Note
Before installation, if you are using Personal
Firewall software, disable it. Once you are sure
that you can print after the installation, restart your
Personal Firewall software.
8 Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
9 The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
10 After reading and accepting the ScanSoft
®
PaperPort
®
SE License Agreement, click Yes.
11 The installation of PaperPort
®
SE will
automatically start and is followed by the
installation of MFL-Pro Suite.