Installing the Driver & Software
14
STEP2
Macintosh
®
Macintosh
®
Network
For Network Interface Users (DCP-540CN only)
(For Mac OS
®
X 10.2.4 or greater)
1
2
3
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
4
Note
Make sure that the machine is turned on by
connecting the power cord.
5 Turn on your Macintosh
®
.
6 Put the supplied CD-ROM into your CD-ROM
drive.
7 Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
8 The Brother software will search for the Brother
device.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
OK. This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically. Go to step 9.
• If this screen appears click OK.
To Next Page
Loading...
