Brother DCP-7010 - About Paper

Chapter 1
1 - 6
About paper
Recommended Paper
To get the best print quality, we suggest using
the following paper.
■ Use paper that is made for plain-paper
copying.
■ Use paper that is 75 to 90 g/m
2
.
■ Use neutral paper. Do not use acidic or
alkaline paper.
■ Use long-grain paper.
■ Use paper with a moisture content of
approximately 5%.
Choosing acceptable paper
We recommend that you test paper
(especially special sizes and types of paper)
on the machine before purchasing large
quantities.
For optimum printing, use a recommended
type of paper, especially for plain paper and
transparencies. For more information on
paper specifications, call your nearest
authorized sales representative or the place
where you purchased your machine.
■ Use labels or transparencies that are
designed for use in laser printers.
■ If you are using special paper and the
machine has problems feeding from the
paper tray, try again using the manual
feed slot.
■ You can use recycled paper in this
machine.
Paper Type Item
Plain paper Xerox Premier 80 g/m
2
Xerox Business 80 g/m
2
M-real DATACOPY 80 g/m
2
IGEPA X-Press 80 g/m
2
Recycled paper Xerox Recycled Supreme
Transparency 3M CG 3300
Labels Avery laser label L7163