Brother DCP-7010 - Making Copies; Copying Basics

3 - 1
3
3
Using the machine as a
copier
You can use your machine as a copier,
making up to 99 copies at a time.
The printable area of your machine begins at
approximately 2 mm from both sides and 3
mm from the top or bottom of the paper.
Note
The printable area shown above is for a
single copy or a 1 in 1 copy using A4 size
paper. The printable area changes with the
paper size.
Making a single copy
1
Load your document.
2
Press Start.
Making multiple copies
1
Load your document.
2
Press Number of Copies repeatedly
until the number of copies you want
appears (up to 99).
—OR—
Press Number of Copies, and then
press or hold or to increase or
decrease the number of copies.
Note
DCP-7025 only:
To sort the copies, press Options and or
to select
Stack/Sort. (See Sorting
copies using the ADF (DCP-7025 only) on
page 3-5.)
3
Press Start.
Stop copying
To stop copying, press Stop/Exit.
Making copies
3 mm
2 mm
Unprintable area