Brother DCP-8020 - Scanning a Full Page

HOW TO SCAN USING WINDOWS
®
8 - 2
How to access the Scanner
1
Open the software application (ScanSoft
®
PaperPort
®
) to scan
a document.
2
Select Scan from the File drop-down menu or select the Scan
button.
3
Select Brother DCP-8025D (if using a parallel interface),
Brother DCP-8025D USB or Brother DCP-8025D LAN from
the Scanner drop-down list box.
4
Click Scan.
If the DCP is connected via:
Parallel
—use ‘
Brother DCP-8025D
’
USB
—use ‘
Brother DCP-8025D USB
’
LAN
—use ‘
Brother DCP-8025D LAN
’
The Brother DCP-8025D, Brother DCP-8025D USB or Brother
DCP-8025D LAN Scanner Setup dialog box will appear:
The instructions for scanning in this Guide are for when you use
ScanSoft
®
PaperPort
®
8.0SE.