Brother DCP-8020 - Table of Contents

xi
Table of Contents
1
Introduction .......................................................................... 1-1
Using this Guide ............................................................... 1-1
Finding information................................................. 1-1
Symbols used in this Guide.................................... 1-1
On-line Registration (USA and Canada) .................... 1-2
DCP part names and operations ................................ 1-3
Control panel overview ..................................................... 1-6
Status LED indications ............................................... 1-8
Inserting originals for copying (and scanning) ................ 1-10
Using the ADF (automatic document feeder) ........... 1-10
Using the scanner glass ........................................... 1-12
2
Paper ..................................................................................... 2-1
About paper ...................................................................... 2-1
Type and size of paper ............................................... 2-1
Recommended paper................................................. 2-1
Choosing acceptable paper.............................................. 2-2
Paper capacity of the paper trays........................... 2-3
Paper specifications for each paper tray ................ 2-4
How to load paper ...................................................... 2-5
To load paper or other media in the paper tray ...... 2-5
To load paper or other media in the manual feed
tray (For DCP-8020)........................................... 2-7
To load paper or other media in the multi-purpose
tray (MP tray) (For DCP-8025D) ........................ 2-9
To use Automatic Duplexing for copy and
print operations (For DCP-8025D) ....................... 2-11
3
On-screen programming ..................................................... 3-1
User-friendly programming ...............................................3-1
Menu table..................................................................3-1
Navigation keys ................................................................3-2
Key Operations table ...................................................... 3-10
4
Getting started ..................................................................... 4-1
General Setup ..................................................................4-1
Setting the Paper Type............................................... 4-1
Setting the Paper Size................................................4-3
Setting the Beeper Volume......................................... 4-4
Toner Save................................................................. 4-4
Sleep Time ................................................................. 4-5