14 - 33 TROUBLESHOOTING AND ROUTINE MAINTENANCE
4
Wait to unpack the new drum unit until immediately before
installing it. Place the old drum unit into the plastic bag and
discard it according to local regulations.
5
Reinstall the toner cartridge into the new drum unit. (See
Replacing the toner cartridge
on page 14-24.)
6
Reinstall the new drum unit, keeping the front cover open.
7
Press
Clear/Back
.
8
Press
1
and when the LCD shows
Accepted
, and close the front
cover.
Caution
If toner scatters and your hands or clothes get dirty, immediately
wipe off or wash with cold water.
Replace Drum
▲
1.Yes
▼
2.No
Select
▲▼
& Set
To Next Page
Loading...
